Samsung’s original Galaxy Watch just got an unofficial Wear OS resurrection
The chunky old Galaxy Watch that Samsung launched back in 2018 has been given a second life. An independent developer has managed to get Wear OS running on hardware that Samsung only ever designed for Tizen.
A Pixel Watch transplant on 2018 hardware
The software is based on the original Pixel Watch’s Wear OS 3.5 system image, which itself runs on Android 11. According to the project’s GitHub page, the developer built a custom Linux 4.19 kernel for the Galaxy Watch while retaining Samsung’s original bootloader.
The result is not an emulator or a skin made to look like Wear OS. Tizen is removed and Wear OS actually boots on the watch.
Quite a lot of the hardware is already working. The display, touchscreen, physical buttons, rotating bezel, always-on display, Wi-Fi, Bluetooth, microphone, speaker, GPS and wireless charging are supported, along with heart rate, steps, the accelerometer, gyroscope, barometer and ambient light sensor. Google Play and Google apps work too, as do phone notifications and pairing through the Wear OS app.
There is even Gemini support through voice or a double press of the lower button. That creates the slightly surreal prospect of talking to Google’s current AI assistant on a watch released when Samsung was still several years away from abandoning Tizen.
The project is still very young, though, and the developer says it has so far been developed and tested on a single watch. Deep sleep only partially works, and early testers are already finding a few inconsistencies that do not show up in the developer’s own setup.
One user who installed the build said it ran surprisingly well but reported that Wi-Fi and Bluetooth kept disconnecting. Another tester says PIN and swipe-pattern setup are not working properly and that the upper button does nothing on their watch, even though the project documentation lists both buttons as functional. Those reports are coming through the Galaxy Watch community thread, where interest in getting the software onto other Tizen Galaxy watches is already building.
The timing makes this much more interesting
Normally this would be a neat modding project for a fairly small audience. But Samsung’s decision to wind down its old Tizen smartwatch ecosystem makes it considerably more relevant.
Samsung moved its watches to Google’s platform with the Galaxy Watch 4 in 2021, leaving the Galaxy Watch, Galaxy Watch Active series and Galaxy Watch 3 behind on Tizen. The company later began shutting down Tizen watch app distribution through the Galaxy Store. Its developer documentation confirms that new and updated Tizen watch apps are no longer accepted.
That has created an awkward situation for people who still own perfectly functional Tizen watches. Earlier this year, one SM-R800 owner reported that after resetting the watch, native apps such as Timer disappeared and could no longer be downloaded through the old store. Others have reported similar problems after resets.
That is where this project becomes more than a technical curiosity. It potentially gives old hardware access to Google Play and a modern app ecosystem.
This is definitely not an official upgrade
There is one fairly important catch. Right now, the build only supports the 46mm Bluetooth SM-R800 Galaxy Watch, not the smaller 42mm model or the LTE versions.
Installing it also replaces Tizen and requires flashing the watch from a PC over Wi-Fi. The developer warns that flashing the build onto another Galaxy Watch model could brick the device, although returning the SM-R800 to Tizen should be possible by flashing Samsung’s stock firmware again.
Still, the fact that Wear OS 3.5 runs this well on an eight-year-old Tizen watch is pretty remarkable. It also raises an obvious question about the Galaxy Watch Active 2 and Galaxy Watch 3, and several users are already asking for ports to those models, although the developer says there are currently no plans to support additional watches.
Don’t miss the latest from Gadgets & Wearables
Subscribe to our monthly newsletter and check out our YouTube channel.
You can also follow Gadgets & Wearables on Google News and add us as a preferred source in Google Search.